How High is the Jeep Commander Engine Replacement Cost?
The Jeep Commander, is no longer on the market. And that’s what makes it more precious. It’s like a hand-me-down heirloom. Looking at its beautiful sturdiness, getting rid of this SUV is pretty emotional. So all we can think of is changing the engine. But Lord, does it get expensive! It takes from $2000 to $6000 for the replacement. This is similar to the 2008 Jeep Wrangler engine Replacement cost, but most of us can’t just boil down so much money right away.
DIY engine replacement with inexpensive components is less expensive than having a professional use of more premium components. Depending on your perspective, this circumstance and the associated cost might be very stressful. We’ve got your back, so to speak. It is time to discuss the cost of a new engine for your Jeep Commander.
Jeep Commander Engine Replacement Cost
Jeep Commander engine will take a toll on your wallet, so head into the battlefield well-prepared. The deets can get a little complex, so I will try my best to get you through. The 2008 Jeep Commander engine takes from at least $2000 to $6000. The only way you can know the price depends on how the car ran on the previous engine.
Your Jeep Commander model can cause variations in the price, but if you take the mid-value as your budget, you are good. Here are some replacements we think may be a good fit for your Jeep Commander.
| Product Name | Price | Warranty |
| Spartan/ATK Long Block Engine | $4198.99 | 4 Years |
| ATK 4.7L Stroker Engine | $4,577.99 | 4 Years |
| Dahmer Long Block Engine | $4,293.18 | 3 Years |
| Mopar Long Block Engine | $5620.65 | 3 Years |
When Should You Replace Your Jeep Commander Engine?
A damaged engine will show signs of the impact of the damage with great intensity. You are bound to see it. Here are the symptoms that call for an engine replacement.
1. Performance issues
When your Jeep can’t accelerate reluctantly starts or has a rough engine idle, it could mean that your engine parts could have worn out. That is a possible conclusion but not the only one. Your sensors could also be defective, and the filters could be dirty. You need to perform a diagnostic to scavenge the problem.
2. Gas Overconsumption
Consistently high fuel costs are usually the result of a problem with how your engine burns gasoline. When a check engine light and other engine-related symptoms are present, the problem is quite dire. If you notice that your automobile is using more gas than usual, you should have a mechanic look at it. Money-wise, this is a wise move.
If there is a problem on the inside of an engine, it will have trouble performing at its best. There’s a chance that your Jeep may stall, tremble at high speeds, and have difficulty going uphill.
3. Knocking noise
A pounding sound from under the hood often indicates serious engine failure. The most common cause of the engine-bearing seizure is inadequate lubrication. As one may expect, this might result from excessive mileage wear.
This problem usually necessitates a rebuild of the engine’s bottom half due to the bearings’ crucial role in supporting the motion of the moving components.
4. Exhaust Smoke
If you ever see a vibrant smoke seeping out, that should represent trouble cooking beneath the hood. Exhaust smoke can refer to engine failure in some cases. But the colour matters. White smoke evaporating signifies a coolant leak which means your engine is prone to overheating. A blue smoke represents an oil leak. This can lead to faster eroding and corroding engine parts due to insufficient lubrication. Black smoke, on the other hand, denotes gas overconsumption.
FAQ
How to Reset the Engine Light in a Jeep Commander?
It’s possible to find the Jeep Commander’s Diagnostic Link Connector by opening the driver’s door and looking under the dashboard. This Commander receptacle is trapezoidal and may or may not be protected by a safety cover.
Pull the plug out by hand if there is one. Plug the OBD II scan tool into the DLC and turn the key to the “on” position with the engine turned off. Two clicks forward on the ignition will power up the Commander’s electronics without actually starting the car.
Are Rebuilt Jeep Commander Engines just as good as a new Jeep engine?
No, because rebuilt Jeep Commander engines are even better than factory-installed ones. Rebuilt or self-built Jeep commander engines are more reliable and warranted due to the parts being chosen explicitly for functionality. The Jeep Commander replacement cost will be much lesser than a new one, so this is a more cost-effective option.
What problems does a 2006 Jeep Commander have?
- 4WD System Warning light On
- Drain tube leaking water
- Lagging transmission
- Exhaust manifold bolts are prone to breaking
- The interior doors break near the handles
- Warm air rises out of the panel outlets instead of cold air when you press the Cold option.
- HVAC blower makes strange sounds.
How much does it cost to replace a new engine?
You can replace most car engines from $3000 to $5000. It might cost up to $6,000 to replace a sophisticated engine. Nonetheless, the average cost to replace the engine in a car with four cylinders is about $4,000.
Takeaway
As your Jeep Commander engine loses its life every day, you start pondering whether it would be better to replace or rebuild your engine. The Jeep Commander engine replacement cost does seem like a considerable amount. Your warranty can help ease matters a bit as you can get some benefits if the contract hasn’t expired yet.
It’s important to remember that the engine isn’t the sole expense. It would be best if you had the proper knowledge and tools to swap engines, and the process might set you back several hundred dollars. So let’s proceed with our operation now that we are well-informed, shall we?
